New SB21 Series Snowblowers

Snow Removal
Key Features
  • Discharge chute deflection
  • Field-installed drift cutters kits
  • Discharge chute rotation as base equipment
  • Torque-controlled impeller moves snow easily

More Info


Choose from a 162.6-cm or 193-cm (64-in. or 76-in.) working width to move large volumes of snow
193-cm (76-in.) working width shown193-cm (76-in.) working width shown

The SB21 Series Loader-Mounted Snowblowers come in a 162.6-cm or 193-cm (64-in. or 76-in.) working width, a 152.4-cm or 68.6-cm (60-in. or 27-in.) working height, and a 38.1-cm (15-in.) diameter auger. These features make quick work of snow-removal jobs.

Steel skid shoes are adjustable and replaceable. The cutting edge is also replaceable.

Discharge chute deflection
Optional hydraulic cylinder controls chute Optional hydraulic cylinder controls chute

Manual adjustment of the chute angle on the spout is standard equipment on the SB21 Series Loader-Mounted Snowblowers.


An optional electrically controlled hydraulic cylinder is available to adjust the deflector angle.


The chute rotation and optional chute angle adjustment are powered by the hydraulic power pack and controlled with rocker switches installed in the tractor operator station.

Discharge chute rotation comes as base equipment
Electrically controlled hydraulic motorElectrically controlled hydraulic motor

As base equipment on SB21 Series Loader-Mounted Snowblowers, the discharge chute rotation is controlled with an electrically controlled hydraulic motor.

The chute rotation is powered by the hydraulic power pack and controlled with a rocker switch installed in the tractor operator station.

Torque-controlled impeller moves excess snow easily
Reduces plugging in heavy snowReduces plugging in heavy snow

Frontier™ SB21 Series Loader-Mounted Snowblowers monitor the torque applied to the impeller, which is an industry-exclusive feature.


The speed of the auger slows down when maximum torque is sensed, alerting the operator to slow ground speed. This allows the impeller to move away excess snow.


This feature reduces plugging during operation.   

Hydraulic three-point power packs required for SB21 Series Loader-Mount Snowblowers
Self-contained hydraulic systemSelf-contained hydraulic system

The SB21 Series Loader-Mounted Snowblower's hydraulic three-point power packs are self-contained and powered by the tractor's rear power take-off (PTO). They are Category 1 and iMatch™ quick-hitch compatible.

  • HP2025 Hydraulic Power Pack is required for model SB2164 Snowblower.
  • HP2134 Hydraulic Power Pack is required for model SB2176 Snowblower.

Add suitcase weights (shown above) for additional ballast to the rear of the tractor.


Snow blower working width 163 cm
64 in.
Power pack width 97 cm
38 in.
Snow blower machine height 152 cm
60 in.
Power pack height 132 cm
52 in.
Snow blower operating 363 kg
800 lb
Power pack operating 243 kg
535 lb
Snow blower shipping 476 kg
1,050 lb
Power pack shipping 243 kg
535 lb
Tractor compatibility
PTO horsepower 18.6-25.4 kW
25-34 hp
PTO rpm 540 rpm
Loader (current John Deere series) 300
Type Two-part
Deflector adjustment (standard) Manual
Deflector adjustment (optional) Hydraulic cylinder
Rotation type Hydraulic
Diameter 21 cm
8.25 in.
Diameter 38 cm
15 in.
Speed, rpm 200 rpm
Type Single
Flighting thickness 1 cm
0.3125 in.
Blades Four
Diameter 61 cm
24 in.
Width 18 cm
7 in.
Speed, rpm 680 rpm
Impeller shaft diameter 3 cm
1.25 in.
Fan relief valve setting 207 bar
3000 psi
Auger relief valve setting 138 bar
2000 psi
Oil cooler Standard
Flow @ 3000 psi (207 bar) At 207 bar: 133.60 L/min
At 3000 psi: 16 gpm
Power pack reservoir 56.8 L
15 gal.
System capacity 68.1 L
18 gal.
Cutting edge
Type Replaceable, reversible
Thickness 1 cm
0.375 in.
Width 5.1 cm
2 in.
Skid shoes
Configuration Adjustable, six positions
Replaceable Standard
Drift cutters
Optional Yes
End plate thickness 0.47 cm
0.1875 in.
Back plate thickness 0.3 cm
0.12 in.
Fan housing thickness 0.3 cm
0.12 in.
Fan blade thickness 0.64 cm
0.25 in.
Side panel bottom thickness 1.27 cm
0.5 in.
Configuration One unit
Set-up time
Labor hours 2.5 to 3 hours
Time period (machine) 1 year